Roland DUO-CAPTURE EX Owner's Manual page 13

6.
When."Ready.to.install.the.driver . " .appears,.connect.the.DUO-CAPTURE.EX.to.the.
computer.using.the.USB.cable.and.set.the.[POWER].switch.to.the."on".position .
MEMO
• Do not connect any cables to the DUO-CAPTURE EX other than the USB cable.
• If a message appears, follow the instructions on the screen.
Windows.XP
If using Windows XP, follow the instructions on the screen and continue the installation.
6-1 . .
If a dialog box that asks whether you want to connect to
Windows Update appears, select the [No, not this time]
button and click the [Next] button.
6-2 . .
Select the [Install the software automatically
(Recommended)] button and click the [Next] button.
6-3 . .
If the "Hardware Installation" dialog box appears, click the
[Continue Anyway] button.
6-4 . .
When "Completing the Found New Hardware Wizard" appears,
click the [Finish] button.
7.
When."Installation.has.been.completed . " .appears,.click.the.
[Close].button.to.close.the."DUO-CAPTURE.EX.Driver.Setup".dialog.box .
The installer exits.
MEMO
If the "Change System Settings" dialog box appears, click the [Yes] button. Windows restarts.
USB Driver Installation
13