Advanced Usb Driver Settings - Roland DUO-CAPTURE EX Owner's Manual

Advanced USB Driver Settings

You can set the input and output audio buffer size settings.
Windows
When using Windows 7, USB driver settings cannot be changed while the monitoring function
of Windows is enabled. Turn off the monitoring function (p. 30).
1.
Exit.all.programs.that.are.using.the.DUO-CAPTURE.EX .
2.
Open.the."Control.Panel".and.set.the.display.mode.as.follows .
•
Windows.7
•
Windows.Vista/Windows.XP
3.
Double-click.the.DUO-CAPTURE.EX.icon .
The "DUO-CAPTURE EX Driver Settings" dialog box appears.
Setting
Audio.Buffer.Size
[Show."README"]
: Icon view
: Classic view
Explanation
You can adjust the input and output audio buffer size.
Decrease the buffer size to decrease latency. Increase the buffer size if audio drops
out.
* After adjusting the buffer size, make sure to restart all programs that are using the
DUO-CAPTURE EX. If using software that has an "audio device test" function, run the
test function.
Displays the online manual for the USB driver.
Appendix
31