Roland DUO-CAPTURE EX Owner's Manual page 10

Introduction
[COMPUTER/TAB] switch
15
Determines the operating mode and sampling frequency of the DUO-CAPTURE EX.
MEMO
For details, refer to the "Read Me First" leaflet.
Switch.position
COMPUTER
48/44.1
TAB
MEMO
Before changing the position of the [COMPUTER/TAB] switch, exit all software that's running
and turn the DUO-CAPTURE EX off.
[DIRECT MONITOR] switch
16
Determines whether the audio signals input via the INPUT 1 and INPUT 2 jacks are output directly.
For information about how the audio signal is handled, refer to the block diagram at the end of
this document.
Switch.position
MONO
STEREO
OFF
MEMO
• When a guitar is connected to the INPUT 1 jack and nothing is connected to the INPUT 2 jack,
set to "MONO. "
• Even when set to "MONO, " a stereo audio signal is output from the DUO-CAPTURE EX's USB
port.
10
Explanation
Select when connecting to a computer (Windows or Mac OS X).
The included USB driver allows you to record, play, and edit high-quality audio with stable
timing.
Set the switch to the sampling rate you want to use.
Select when connecting to a tablet device.
There is no need to install the included USB driver.
In this mode, the DUO-CAPTURE EX operates on power from the batteries or the optional
AC adaptor.
The sampling frequency is fixed at 44.1 kHz.
Explanation
Monitor in monaural.
Monitor in stereo.
Select when monitoring using the DAW software. Only audio input via the
DUO-CAPTURE EX's USB port can be monitored.
When using with GarageBand, set to "OFF. "
15 16