Field Settings; Model Type Setting; Temperature Display Switch - Daikin FTXN09KEVJU Service Manual

Field Settings

4. Field Settings

4.1

Model Type Setting

ARC452A19, 20
 This remote controller is common to the heat pump model and cooling only model. Use the DIP
 Make the setting as shown in the illustration. (The factory set is the heat pump side.)
4.2

Temperature Display Switch

 You can select Fahrenheit or Celsius for temperature display.
 Press the TEMP
224
switch on the remote controller to set the heat pump model or cooling only model.
• Heat pump model: Set the DIP switch to H/P.
• Cooling only model: Set the DIP switch to C/O.
 and  buttons simultaneously for 5 seconds to change the unit of temperature
display.
DIP switch
H/P
C/O
(R12275)
(R14477)
Trial Operation and Field Settings
SiUS041111