To Originate A Call Using One-Touch Buttons - NEC Dterm Series I User Manual

TO ORIGINATE A CALL USING ONE-TOUCH BUTTONS

NOTE: With DTP-32D
Press desired
To program:
NOTE: Available only on Dterm stations with speed calling keys.)
Press Conf button.
Press desired
button LED lights steady.
Enter desired station number, feature code or outside access code and
telephone number. Display indicates digits dialed.
Press Conf again to save the number.
To verify:
Press Conf button.
Press desired
Display indicates digits programmed.
NOTE: When a station number is programmed on a one touch button, the
associated LED Light will light when that station is in use. (Available for
32D terminals only).
Speed Call button, or press
Conf flashes
One-Touch button, Speaker
One Touch button.
- 14 -
Speaker and Speed Call.