Terminal Setup With The Feature Key - NEC Dterm Series I User Manual

TERMINAL SETUP WITH THE FEATURE KEY

Microphone On/Off
The MIC lamp shows the status of the built-in microphone.
To change microphone status:
Press Soft Key associated with the MIC Display or press
To select ringer tone
The Dterm Series i has 8 ringer tones that you can select.
Press Feature
8).
Tone No.
1
2
3
4
5
6
7
8
and 3. The LCD displays the selected tone number (n=1 ~
Frequency/Modulation
520+660Hz, 16Hz Modulating Signal
520+660Hz, 8Hz Modulating Signal
1400+1100Hz
1100Hz
540Hz
1100+1400Hz, 16Hz Modulating Signal
660+760Hz, 16Hz Modulating Signal
1100Hz Envelop Signal
- 11 -
Feature and 1.