Delete Array - Promise Technology SuperTrak SX6000 User Manual

SuperTrak SX6000™ User Manual

Delete Array

By pressing [4] from the "Main Menu" screen displays the "Delete Array Menu" (see
below).
SuperBuild Array Utility 1.10 (c) 2001 Promise Technology, Inc.
Array No RAID Level
Array 1 RAID0
Array 2 RAID1
Array 3 -----
Array 4 -----
Array 5 -----
Array 6 -----
Note: *-- Bootable Array
Up Down [ESC] Exit
[ ] [ ]
NOTE: Deletion of an existing disk array could result in the loss of all data from the
hard drives of the affected array. Record all array information, including array type, disk
members, and stripe block size, in case you wish to undo a deletion. Arrays may
possibly be recovered after deletion by immediately re-defining the array with
information identical to the original configuration.
To delete an array, highlight the Array you wish to delete and press the Del key.
Confirm yes to the following warning (see Figure 13 message using the Ctrl-Y keys to
Are you sure you want to delete this array?
Press <Ctrl-Y> to Delete, or other to abort.
continue array delete. Press any other key to abort the deletion process.
[ Delete Array Menu ]
Total Drv Capacity (MB)
2
2
-----
-----
-----
-----
[ Keys Available ]
[Del] Delete
Figure 12 Delete Array Menu
Figure 13 Delete Array Dialogue Box
- 27 -
Chapter 3
Status
13044 Functional
6522 Functional
----- -----
----- -----
----- -----
----- -----