Table of Contents
Advertisement
Problem
The oven does not heat
up
The oven does not heat
up
The display shows F11
The oven lamp does not
operate
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
INSTALLATION INSTRUCTIONS
Warning! Refer to "Safety information"
chapter.
Installing the oven
Warning! Installation into flammable
material must agree with NIN 2005,
chapter 4.2.2 of the VKF (Association
of Cantonal Fire Insurers) fire protection
guidelines and regulations.
1. Pull the appliance drawer out as far as it
goes, take hold of it and remove it.
Possible cause
The Child Lock is activated
The fuse is released
The meat probe plug is not correct-
ly installed into the meat probe
socket
The oven lamp is defective
Refer to "Deactivating the Child
Lock"
Make sure, if the fuse is the cause
for the malfunction. If the fuse re-
leases again and again, refer to an
authorized electrician
Install the meat probe plug as far
as possible
Refer to "Replace the oven lamp"
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the oven cavity.
.........................................
.........................................
.........................................
A
A
A
A
D
A 548
N 550
2. Use the side handles to hold the oven
and slide it flush into the recess.
Caution! Make sure the cable is free
when you slide the appliance.
electrolux 19
Remedy
ca.50
A
435
Advertisement
Table of Contents
