Table of Contents
Advertisement
20 electrolux
3. Use at least 2 screws to fix the oven on
both sides (Detail A).
A
4. The enclosed check valve F is screwed
in to the exhaust air hose. Mount the
check valve F with hose to the appli-
ance (bayonet connection). Exhaust air
temperature: max. 80°C.
A shortened element must be installed
above the oven.
The rear wall must be able to be removed.
Raster: recommended operating ranage.
Electrical connection
Let a qualified electrician connect appliance
to the electricity supply. Use a H05VV-F
type power cable or higher. Install the appli-
ance with a socket supply line, otherwise
the fixed home electrical system must in-
clude an isolating device with at least a 3mm-
contact separation to enable a simultane-
ENVIRONMENT CONCERNS
The symbol
on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
ous and all-pole cut off from the mains (ac-
cording to NIN 2000). The customer must
have a socket for the electrical connection
that is accessible and outside the coordina-
tion room. The length of the connection ca-
ble must be approximately 120 cm with
lines connected direct to the mains.
1. Open the terminal box (detail D).
2. Open the catch on the cord grip (detail E).
3. See the connection diagram for the ter-
minal connection.
4. Secure the cord grip by pressing firmly
on the catch (detail F).
5. Close the terminal box.
6. Fix the connection cable into the holes
provided to prevent it rubbing against
the drawer (detail G).
Installation diagram 400V
Phase definitions: L1, L2, L3 (or R, S,T)
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be
caused by inappropriate waste handling of
this product. For more detailed information
Advertisement
Table of Contents
