Care And Cleaning - Electrolux EBVSL6 User Manual

Activating the Child Lock
1. Activate the appliance.
Do not set an oven function.
2. Press
and - at the same time until
the display shows a message.
Deactivating the Child Lock
1. Do the above steps again.
Cooling fan
When the appliance operates, the cooling
fan switches on automatically to keep the
surfaces of the appliance cool. If you switch
off the appliance, the cooling fan continues
to operate until the appliance cools down.
Safety thermostat
To prevent dangerous overheating (due to
incorrect use of the appliance or defective
components), the oven has a safety thermo-

CARE AND CLEANING

Warning! Refer to "Safety information"
chapter.
• Clean the front of the appliance with a
soft cloth with warm water and cleaning
agent.
• To clean metal surfaces use a usual clean-
ing agent
• Clean the oven interior after each use.
Thus you can remove dirt more easily
and it does not burn on.
• Clean stubborn dirt with a special oven
cleaner.
• Clean all oven accessories (with a soft
cloth with warm water and cleaning
agent) after each use and let them dry.
• If you have nonstick accessories, do not
clean them using an aggressive agents,
sharp edged objects or dishwasher. It
can destroy nonstick coating!
Catalytic walls
The walls with a catalytic coating are self-
cleaning. They absorb fat which collects on
walls while the oven operates.
To support this self-cleaning process heat
the oven without any food regularly:
• Turn the oven light on.
• Remove accessories from the oven.
• Select an oven function.
• Set the oven temperature to 250 °C and
let oven operate for 1 hour.
stat, which interrupts the power supply. The
oven switches back on again automatically,
when the temperature drops.
The automatic switch-off
If you do not change the temperature
or stop the oven after some time, the
oven stops automatically.
The last temperature set flashes in the
display.
The oven stops with the temperature of:
• 30 - 120° C after 12.5 hours
• 120 - 200° C after 8.5 hours
• 200 - 230° C after 5.5 hours
Using the oven after an automatic
switch-off
Use .
• Clean the bottom of the cavity with a soft
and damp sponge.
Do not clean the catalytic surface.
Discolouration of the catalytic surface
has no effect on catalytic properties.
Aluminium base plate
• clean the aluminium base plate after each
use with a soft brush and warm water
and cleaning agent;
• never use abrasive cleaning agents or
sponges, sharp objects, stain removers
to clean the aluminium base plate;
• with stubborn dirt soak the aluminium
base plate in warm water and soap suds;
• do not clean the aluminium base plate in
dishwasher;
• when cleaning use a flat surface to pre-
vent the aluminium base plate from defor-
mation;
Shelf Support Rails
Removing the shelf support rails
1. Pull the front of the shelf support rail
away from the side wall.
electrolux 15