Table of Contents
Advertisement
Installation Instructions
1
Attention: The new appliance may only be installed and connected by a
registered expert.
Please comply with this. If you do not, any damage resulting is not covered
by the warranty.
1
Safety information for the installer
• The electrical installation is to be set up so that the appliance can be iso-
lated from the mains with a minimum 3mm all-pole contact separation.
Suitable separation devices include e.g. cut-outs, fuses (screw fuses are
to be taken out of the holder), RCD's and contactors.
• Anti-shock protection must be provided by the installation.
• The built-in unit must meet the stability requirements of DIN 68930.
• Built-in ovens and built-in cooking surfaces are fitted with special connec-
tion systems. For safety reasons, they must only be combined with appli-
ances from the same manufacturer.
34
Advertisement
Table of Contents
