Clock Functions - Electrolux EBVSL6 User Manual

10 electrolux
When the appliance operates at the set
temperature, an acoustic signal sounds.
Showing the oven temperature
Touch + or - at the same time.
The display shows the oven temperature.
Heat-up indicator
When you activate an oven function, the
bar on the display comes on. The bar
shows that the temperature increases.
Rapid heat-up indicator
For some oven functions the rapid heat-up
function decreases the heat-up time auto-

CLOCK FUNCTIONS

Clock functions
Symbol Function
Minute Minder
Duration
End Time
You can use Duration and End Time at
the same time, if the appliance is to ac-
tivated and deactivated automatically
later.
If you set the time for a clock function, the
time starts to count down after 5 seconds.
Setting the clock functions
1. Activate the appliance. Set the heating
function and, if necessary, the tempera-
ture.
2. Touch
again and again until the dis-
play shows the necessary clock function
and the related symbol.
3. Touch + or - to set the necessary time.
Touch OK to confirm.
When the appliance operates at the set
time, an acoustic signal sounds. The ap-
pliance deactivates. The display shows
a message.
4. Touch a sensor field to stop the signals.
With the Minute Minder you must acti-
vate the appliance to set the clock func-
tion. You do not have to set a heating
function.
With the Duration and End Time , after
90 % of the set time, an acoustic signal
matically. The bar of the indicator moves
from right to left until the oven reaches the
target temperature.
Residual heat indicator
When you deactivate the appliance, the dis-
play shows the residual heat. You can use
the heat to keep the food warm.
To set a countdown (max 2 hours 30 minutes). This function
has no effect on the operation of the appliance.
To set how long the appliance has to be in operation (max. 23 h
59 min).
To set the switch-off time for an oven function (max. 23 h 59 min).
sounds. The appliance deactivates.
The appliance uses the residual heat to
continue the cooking process until the
time is completed (3-20 minutes).
When you use Meat Probe, Duration
and End Time do not work.
Time Extension
The Time Extension makes the oven func-
tion continue after the set time ends.
• Applicable for all oven functions with Du-
ration or Weight Automatic .
• Not applicable for oven functions with
Meatprobe .
Activating the function:
1. When the cooking time ends, an acous-
tic signal sounds. Touch any sensor field.
2. The display shows the message for
Time Extension for five minutes.
3. Touch
4. Set Time Extension period. Touch OK
to confirm.
SET+GO
SET+GO function lets you set an oven func-
tion (or programme) and use it later with
one touch of the sensor field.
Description
to activate.