Using The Accessories - Electrolux EBVSL6 User Manual

12 electrolux
Assisted Cooking with Meatprobe
Automatic
1. Activate the appliance.
2. Touch
or
sisted Cooking , the necessary category
and the dish.
3. Touch
or
Meatprobe Automatic .
4. Touch OK to confirm.
The display shows „ Meatprobe ".
5. Install the meat probe.
When the programme ends, an acoustic
signal sounds.
Use a sensor field to deactivate the
acoustic signal.
6. Remove the meat probe.
Warning! The meat probe is hot! Risk
of burns! Be careful when you remove
the tip and plug of the meat probe.
My Programmes menu
You can store your favourite settings like du-
ration, temperature or oven function. They
are available in My Programmes menu. You
can store 20 programmes.
Storing a programme
1. Activate the appliance.
2. Select the oven function or Assisted
Cooking function.
3. Touch
again and again until the dis-
play shows " SAVE ". Touch OK to con-
firm.

USING THE ACCESSORIES

Meatprobe
Meat probe measures the core temperature
of the meat. When the meat reaches set tem-
perature the oven deactivates automatically.
There are two temperatures to be set
• The oven temperature
• The core temperature
Important! Only use the meat probe
supplied or genuine replacement parts.
1. Activate the appliance.
2. Put the tip of the meat probe into the
centre of the meat.
to set the function As-
to set the function
4. The display shows the first free memory
position.
Touch OK to confirm.
5. The first letter flashes.
Touch + or - to change the letter.
Touch OK to confirm.
6. Touch
or
the right or to the left. Touch OK to con-
firm.
The letter flashes.
7. Repeat steps 5 and 6 again to write
name of the program.
Touch and hold OK to save.
You can overwrite a memory position in
storage. (Refer to the section „Storing a
programme". At step 4 touch
to choose memory position you want
to overwrite.)
You can change the name of a Pro-
gramme in the menu " Edit Programme
Name ".
Activating the programme
1. Activate the appliance.
2. Select My Programmes menu. Touch
OK to confirm.
3. Select your favourite programme name.
Touch OK to confirm.
3. Put the plug of the meat probe into the
socket on the side wall of the oven.
The display shows Meatprobe .
4. Touch + or - in less than 5 seconds to
set the core temperature.
to move the cursor to
or
2
1