Operating Temperature; Manual Operation - Midea Inverter Split-type Room Air Conditioner Owner's Manual

OPERATING TEMPERATURE

Mode
Temperature
Room temperature
Outdoor temperature
CAUTION:
1. If air conditioner is used outside of the above conditions, certain safety protection
features may come into operation and cause the unit to function abnormally.
2. Room relative humidity less than 80%. If the air conditioner operates in excess of this
figure, the surface of the air conditioner may attract condensation. Please sets the vertical
air flow louver to its maximum angle (vertically to the floor), and set HIGH fan mode.
3. Optimum performance will be achieved within these operating temperature.

MANUAL OPERATION

Manul operation can be used temporarily in case you can not find the remote controller or
its batteries are exhausted.
AUTO/COOL
Manual
control button
Manual
AUTO/COOL
control button
Cooling operation
>17 C
0 C 50 C
~
( -15 C 50 C:For the models with
~
low temperature cooling system)
Heating operation
<30 C
-15 C 34 C
~
NOTE: The unit must be turned off before
operating the manual control button. If the
unit is operational, continue pressing the
manual control button until the unit is off.
Open and lift the front panel up to an angle
1
until it remains fixed with a clicking sound.
One press of the manual control button will
2
lead to the forced AUTO operation. If press
the button twice within five seconds, the unit
will operate under forced COOL operation.
Close the panel firmly to its original
3
position.
CAUTION:
This button is used for testing purposes
only. You had better not choose it.
To restore the remote controller operation,
use the remote controller directly.
4
Drying operation
>10 C
0 C 50 C
~