Installation Instructions; Preparation; Design Notice; Ambient Temperature Range For Unit Operating - Midea MP120QWBA3RC1 Operator's Manual

Installation Instructions

Preparation

NOTE:
All the illustrations in the manual are for explanation purpose only. Your machine may be slightly different.
The actual shape shall prevail. The unit can be controlled by the unit control panel alone or with the remote
controller.
front

Design Notice

In order to ensure the optimal performance of our products, the design specifications of the unit and
remote control are subject to change without prior notice.

Ambient Temperature Range For Unit Operating

MODE Temperature Range
Cool 17-35°C (62-95°F)
Dry 13-35°C (55-95°F)

Exhaust Hose Installation

The exhaust hose and adaptor must be installed or removed in accordance with the usage mode. For
COOL,HEAT(heat pump type) or AUTO mode must be installed exhaust hose. For FAN, DRY or HEAT
(electrical heat type) mode must be removed exhaust hose.
 
Page 6
control panel
horizontal louver
blade
(swing automatically)
upper air filter
(behind the grille)
handle
(both sides)
upper air intake
remote signal
receptor
drain outlet
air outlet
lower air filter
Panel
lower air intake
power plug socket
drain outlet
(only for pump
heating mode)
power cord buckle
power cord outlet
Caster
bottom tray
drain outlet
MODE
Heat(pump heat
mode)
Heat(electrical
heat mode)
rear
Temperature Range
5-30°C (41-86°F)
≥
30°C (86°F)