Table of Contents
Advertisement
Initialization #1
Scope:
This function is used to restore feature USER default settings stored in memory.
Procedure:
1. With the printer power turned OFF and no paper loaded, press and hold the
HIGH IMPACT and LF keys while turning ON the printer power switch. Hold keys
until printer initialization (carriage movement) is completed. The LCD display will
read "EEPROM INITIAL 1 ".
2. The inialization process is completed when the printer returns to a READY state.
END OF PROCEDURE
Initialization #2 (Cut-sheet)
Scope:
This function is used to calibrate and set Cut-sheet media sensor thresholds.
• Right/left edge sensors
• Manual feed paper sensor
• Reference pulse for skew detection
Procedure:
1. Select control panel
2. With the printer power turned OFF and no paper loaded, press and hold the
SPEED and TEAR OFF keys while turning ON the printer power switch. Hold
keys until printer initialization (carriage movement) is completed. The LCD
display will read "EEPROM INITIAL 2, CUT SHEET MODE ".
Load a cut-sheet paper landscape (
3.
into the printer in three different positions comparing open and closed sensor
readings to set the appropriate edge detect and media in/out thresholds.
failure to load the paper in a landscape orientation will cause "PAPER EDGE
SENSOR ERROR" and incorrect threshold settings.
4. The initialization process is completed when the printer returns to a READY
state.
END OF PROCEDURE
AUTO
print gap, and Cut Sheet
6
modes.
) into the printer. The paper will feed
ACCEL-7450
NOTE:
Hide quick links:
Advertisement
Table of Contents
