Table of Contents
Advertisement
COPY FUNCTIONS
Using the SPF/RSPF
1
Place the originals.
2
Press the [2 IN 1 / 4 IN 1] key
(
/
) to select the mode.
3
Set the number of copies and other
settings, and press the [START] key (
The copy is delivered to the paper output tray.
Setting the layout pattern
You can select the layout pattern for copying 2 original pages or 4 original pages onto one sheet of paper. The
available layout patterns are shown on the first page of this section.
The layout pattern can also be selected in the system settings.
Note
1
Use the [2 IN 1 / 4 IN 1] key (
to access the setting.
Selecting the layout for 2 IN 1 copy
With the 2 IN 1 / 4 IN 1 indicators off, hold down the [2
IN 1 / 4 IN 1] key (
/
(
) blinks.
Selecting the layout for 4 IN 1 copy
With the 2 IN 1 indicator lit (
1 / 4 IN 1] key (
/
(
) blinks.
32
(p.16)
The mode is selected in
the order "2 IN 1"
(
), "4 IN 1" (
"Off".
/
) until the 2 IN 1 indicator
The setting code of the
currently selected pattern
will blink in the first digit
of the display.
), hold down the [2 IN
) until the 4 IN 1 indicator
The setting code of the
currently selected pattern
will blink in the first digit
of the display.
• To cancel 2 IN 1 / 4 IN 1 copying, press the
Note
• To cancel 2 IN 1 / 4 IN 1 copy mode, press
If the memory becomes full
),
• If the memory becomes full while scanning the
originals, the ORIGINAL DATA indicator (
will blink, "FUL" will appear in the display, and the
machine will stop copying.
• To copy the originals that have been scanned up
to that point, press the [START] key (
• To clear the data that has been scanned into
memory, press the [CLEAR ALL] key (
).
[CLEAR] key (
(p.57)
2
)
Select the setting code by pressing a
numeric key.
Function
2 IN 1 layout
4 IN 1 layout
See page
31
for layout pattern.
The factory default settings are indicated by " * ".
The entered number blinks in the first digit of the display.
3
Press the [START] key (
The selected setting code stops blinking and
lights steadily. This completes the setting.
4
Press the [2 IN 1 / 4 IN 1] key
(
/
The display returns to the number of copies display.
(
)
[CLEAR] key
.
the [2 IN 1 / 4 IN 1] key (
repeatedly until the 2 IN 1 / 4 IN 1 indicators
(
/
) are both off.
).
To select "Pattern 2",
press the [2] key.
Setting code
* 1 (Pattern 1)
2 (Pattern 2)
* 1 (Pattern 1)
2 (Pattern 2)
3 (Pattern 3)
4 (Pattern 4)
) to exit the setting.
/
)
)
DATA
).
) or the
(p.57)
).
Hide quick links:
Advertisement
Chapters
Table of Contents
