Misfeed Removal; Misfeed In The Spf/Rspf - Sharp AR-5516 Operation Manual

MISFEED REMOVAL

When a misfeed occurs, the misfeed indicator (
will automatically stop.
Check the blinking misfeed location indicator to identify the location of the misfeed and remove it.
The paper may tear when you remove a misfeed. In this event, be sure to remove all torn pieces of paper from the
Note
machine, taking care not to touch the photoconductive drum (the green part). Any scratches or damage to the
surface of the drum will cause dirty copies.

MISFEED IN THE SPF/RSPF

1
Remove the misfed original.
Section A
Open the feeding roller cover and remove the
misfed original from the document feeder tray.
Close the feeding roller cover.
Feeding roller cover
) and a misfeed location indicator (
Check sections A, B, and
C in the left shows the
illustration (see the next
page), and remove the
misfed original.
) will blink and the machine
(p.73)
(p.74)
(p.78)
(p.79)
Section B
Open the SPF/RSPF and rotate the two release
rollers in the direction of the arrow to feed the
original out. Close the SPF/RSPF and then
remove the original.
If a small original (A5 etc.) is misfed, open the
right side cover and remove the original. Close
the right side cover.
Right side cover
6
Roller
73