Loading Paper; Paper - Sharp AR-5516 Operation Manual

LOADING PAPER

The paper required indicator (
the selected paper tray is not installed or is improperly installed.

PAPER

For best results, use only SHARP recommended paper.
Paper tray type Paper type
Paper tray Standard paper
250-sheet paper Recycled paper
feed unit
2 x 250-sheet
paper
feed unit
Bypass tray Standard paper
Recycled paper
Transparency film
Labels
Thick paper
Envelopes
1
* A5 can be used in the upper paper tray but cannot be used in other trays (including trays in optional paper feeding unit).
When making a large number of copies or prints using 90 g/m
2
*
about 100 pages have been printed. The output may not stack correctly if more than 100 pages are allowed to accumulate.
3
* The number of sheets of the paper which can be set changes with the weight of a paper.
Special papers
Follow these guidelines when using special papers.
● Use SHARP recommended transparency film and label sheets. Using other than SHARP recommended
paper may result in misfeeds or smudges on the output. If other than SHARP recommended media must
be used, feed each sheet one at a time using the bypass tray (do not attempt continuous copying or
printing).
● There are many varieties of special paper available on the market, and some cannot be used with this
machine. Before using special paper, contact your authorised service representative.
● Before using other than SHARP recommended paper, make a test copy to see if the paper is suitable.
) will light up when there is no copy paper in the selected paper feed tray, or when
Size
1
A5*
B5
A4
B4
A3
A6R to A3
A6R to A4
A6R to A3
International DL
(110 mm x 220 mm)
International C5
(162 mm x 229 mm)
Commercial 9
(3-7/8" x 8-7/8")
Commercial 10
(4-1/8" x 9-1/2")
2
paper, remove the output from the paper output tray when
Weight
56 g/m to 90 g/m
2 2 2
* 250 sheets
(Load paper lower
than the line on the
tray)
56 g/m to 90 g/m
2 2
100 sheets *
Load one sheet of
paper each time on
the bypass tray.
129 g/m to 200 g/m
2 2
Load one sheet of
paper each time on
the bypass tray.
106 g/m to 128 g/m
2 2
You can load multiple
sheets of paper on
the bypass tray.
91 g/m to 105 g/m
2 2
You can load multiple
sheets of paper on
the bypass tray.
5 sheets
Capacity
1
3
9