Automatic Two-Sided Copying (Ar-5516D/Ar-5520D) - Sharp AR-5516 Operation Manual

AUTOMATIC TWO-SIDED COPYING
(AR-5516D/AR-5520D)
Two originals placed on the document glass can be copied onto each side of a single sheet of paper. In addition, an
RSPF can be used to copy two originals onto one sheet of paper, or one two-sided original onto two sheets of paper,
or one two-sided original onto each side of one sheet of paper.
Document
glass
One-sided original
→ Two sides
RSPF
• To use paper in the bypass tray, make a two-sided copy as explained in
Note
BYPASS TRAY"
• When performing automatic two-sided copying of a one-sided original, or one-sided copying of a two-sided
original, the image on the back can be rotated 180 degrees to reverse the top and bottom (Image rotation in
duplex copying). To rotate the image 180 degrees, enable the setting as explained in
DUPLEX COPYING" (p.25)
a one-sided vertical (portrait) original is placed in a horizontal orientation (B4 or A3 size) for two-sided copying,
the top and bottom of the images on the front and back of the paper will be reversed, and thus this function can
be conveniently used to make the top and bottom of the images agree.
B4 or A3
portrait original
1
2
Original → Paper
One-sided original → Two sides
Two-sided original
→ One side
(p.26).
or in the system settings (p.56), and then follow the steps below. In particular, when
Orientation of the
placed original
A5 to A3
• The bypass tray cannot be
Two-sided original
A5, B5, B5R, A4, A4R, B4, A3
→ Two sides
• Special paper cannot be
• The bypass tray can only be
"TWO-SIDED COPYING USING THE
Normal automatic
two-sided copying
The top and bottom of
the images on the front
and back are reversed.
Usable paper
used.
used.
used when making
one-sided copies from
two-sided originals.
"IMAGE ROTATION IN
If the orientation of
two-sided copying
is changed
The top and bottom of the
images on the front and
back are the same.
23
2