Making A Copy Darker Or Lighter; Selecting The Tray - Sharp AR-5516 Operation Manual

COPY FUNCTIONS

MAKING A COPY DARKER OR LIGHTER

Automatic exposure adjustment is initially enabled. This function automatically adjusts the copy image according to
the original being copied. If you wish to select the exposure level yourself, follow the steps below. (Select from two
original types and five exposure levels for each original type.) The exposure level used in automatic exposure
adjustment can also be changed.
Original types
● AUTO ......Automatic exposure adjustment is enabled and the exposure is automatically adjusted according to the
original being copied. The exposure is lowered for coloured areas and background shadows.
● TEXT.......The exposure is raised for light areas and lowered for dark backgrounds to make text easier to read.
● PHOTO ...Halftones in the photo are reproduced with greater clarity.
1
Press the [AUTO/TEXT/PHOTO] key
( / / ) to select the original
AUTO
type.
To return to automatic adjustment, press until
Note
the AUTO indicator (

SELECTING THE TRAY

Auto paper select mode
on the document glass and the original size is selected, or when the original is placed in the SPF/RSPF, the tray with
the same size of paper as the original is automatically selected. If you wish to use a tray other than the automatically
selected tray (for example you wish to enlarge or reduce the copy or use the bypass tray), press the [PAPER
SELECT] key ( ) to select the desired tray.
• If the desired PAPER SIZE indicator does not light up, change the paper in the tray to the desired paper size.
Note
(p.12)
• Automatic ratio selection
selected.
Auto tray switching (when there are two or more paper trays)
If the tray runs out of paper during copying and there is another tray with the same size of paper and the same
feeding orientation (horizontal or vertical), the other tray is automatically selected and copying continues. "Auto tray
switching" can be disabled in the system settings (p.57).
18
("ADJUSTING THE AUTOMATIC EXPOSURE LEVEL"
To adjust the exposure of
a text original manually,
press until the TEXT
indicator ( ) lights.
To copy a photo, press
until the PHOTO
indicator ( ) lights.
) lights.
AUTO
(p.17) normally operates (unless it has been disabled), and thus when the original is placed
(p.19) does not operate when the bypass tray or a tray set for a special paper size is
2
Press the [Light] key (
key ( ) to adjust the exposure.
Exposure value guidelines
Note
1 – 2 Dark originals like newspapers
3 Normal originals
4 – 5 Coloured text or text written in pencil
(p.55))
) or [Dark]
For a darker image,
press the [Dark] key
( ). For a lighter
image, press the [Light]
key ( ).
If exposure level 2 or 4 is
selected, the two
indicators will light
simultaneously.