Abit LM6E Pentium II User Manual page 68

A-4
Installing Hardware Reset Switch Connector
PN2 Pin 1-2: Attach the cable from the case's Reset switch to this header .
Press and hold the reset button for at least one second to reset the system.
Pin number
1
2
Installing speaker connector
PN2 Pin 4-7: There is no specific orientation for pin 4 and pin 7. Connect the
four-threads speaker cable to the PN2 header pins on the motherboard.
Pin number
4
5
6
7
Installing suspend LED connector
PN2 Pin 9-10: There is a specific orientation for pin 9 and pin 10. Connect
the two-threads suspend LED switch connector of the computer case to correct
pins of header on the motherboard.
Pin number
9
10
Name or significance of signal
Ground
Reset input
Name of the signal or signification
+5VDC
Ground
Ground
Speaker data
Name or significance of signal
LED Power
Suspend LED active
Appendix A
Watch the pin position and the
orientation