Abit LM6E Pentium II User Manual page 34

3-6
Method 2: Since you have to open the computer case when
Note : The increase by 2.5% of the CPU speed is not a standard
feature of this product. It is only for use by our development
department to verify that the CPU is
when CPU speed, operating temperature and power supply
are 2.5% higher or
to guarantee product stability. We require the manufacturer
of the Clock Generator to meet the demands of our
Attention: After setting up the parameters and you leave
Chapter 3
you change the CPU, it could be a good idea to
use the CCMOS jumper to erase the parameters of
the original CPU and to enter BIOS Setup to set
up CPU parameters again.
lower than the standard values. This is
development department and to add a TURBO
Frequency feature used for testing purposes by our
R&D department. Of course, you can use this feature
to test the stability of your own system, but after you
have tested the product, we recommend that you set it
back to its normal value in order to guarantee system
stability.
the BIOS SETUP, and you have verified that the
system can be booted, do not press the Reset
button or turn off the power supply.
Otherwise the BIOS will not read correctly, the
parameters will fail and you must enter CPU
™
SOFT MENU
parameters all over again.
able to work normally
II again to set up the