Spread Spectrum Modulated - Abit LM6E Pentium II User Manual

Introduction of BIOS
SDRAM RAS Precharge Time:
Two options are available: Slow or Fast. This option specifies the length
of the RAS precharge part of the DRAM system memory access cycle when
SDRAM system memory is installed. The default setting is Slow.
SDRAM CAS latency Time:
Two options are available: 2 and 3. You can select SDRAM CAS
(Column Address Strobe) latency time according your SDRAM
specification.

Spread Spectrum Modulated:

Four options are available: Disable$0.50%(CNTR)$0.5%(DOWN).
EMC (Electro-Magnetic Compatibility Test) testing may need to adjust
these options for optimal result, we do not recommend you change the
default, except for special reasons. Some values you select may cause
system instability under some situations, please be careful.
There are small differences in the chipset feature setup according to
different motherboard models, but this has no influence upon
performance. Our default setup should be the best one. That is the reason
why we do not describe all the features of this menu.
3-21
For