Abit LM6E Pentium II User Manual page 66

A-2
Installing HDD
IDE1 (Primary IDE): Connect one end of the 40-pin cable that comes with the
drive to the HDD connector, and the other end to IDE1 pin connector on the
motherboard.
Note: Be sure that the red line on the cable connects to the first pin of the
connectors.
Installing CD-ROM drive
IDE2 (Secondary IDE): Connect one end of the 40-pin cable that comes with
the drive to the CD-ROM connector, and the other end to the IDE2 pin
connector on the motherboard.
Note: Be sure that the red line on the cable connects to the first pin of the
connectors.
Installing Keylock and power LED
connectors
PN1 Pin 1-5: There is a specific orientation for pin 1 to pin 5. Insert the two-
threads keylock cable into pin 4 and pin 5, and three-threads power LED cable
to Pin 1 ~ pin 3. Correct pins of header on the motherboard.
Pin number
1
2
3
4
5
Watch the pin position and the orientation
Watch the pin position and the orientation
Name of the signal or signification
+5VDC
No connection
Ground
Keyboard inhibit Signal
Ground
Watch the pin position and the
orientation
Appendix A