Abit LM6E Pentium II User Manual page 13

Installing the Motherboard
PN1(Pin 6-7): HDD LED Header
Attach the cable from the case's HDD LED to this connector.
Pin number
6
7
PN1 (Pin 8-9): Power Switch Header
Pin number
8
9
PN1(Pin 10-11): Hardware Suspend Switch (SMI Switch)
Header
Attach the cable from the case's suspend switch (if there is one) to this switch.
Use this switch to enable/disable the power management function by hardware.
Pin number
10
11
PN2(Pin 1-2): Hardware Reset Header
Attach the cable from the case's Reset switch to this connector. Press and
hold the reset button for at least one second to reset the system.
Pin number
1
2
Name or significance of signal
LED power
HDD active
Name or significance of signal
Ground
Power On/Off switch
Name or significance of signal
+3V Standby
Suspend signal
Name or significance of signal
Ground
Reset input
2-5