Abit LM6E Pentium II User Manual page 67

Quick Installation
Installing HDD LED connector
PN1 Pin 6-7: There is a specific orientation for pin 6 and pin 7. Connect the
two-threads IDE HDD LED connector of the computer case to correct pins of
header on the motherboard.
Pin number
6
7
Installing power On/Of switch connector
PN1 Pin 8-9 : There is no specific orientation for pin 8 and pin 9. Connect the
two-threads power switch cable to the PN1 header pins on the motherboard.
Pin number
8
9
Installing suspend switch connector
PN1 Pin 10-11: There is no specific orientation for pin 10 and pin 11. Connect
the two-threads suspend switch connector of the computer case to correct pins
of header on the motherboard. You can ignore this connector since most of
computer cases do not support this feature (the motherboard itself supports it).
Pin number
10
11
Watch the pin position and the
orientation
Name of the signal or signification
LED power
HDD active
Name of the signal or signification
Ground
Power On/Off switch
Name of the signal or signification
Ground
Suspend signal
A-3