Installing the Motherboard
5.
Slide the clips on the supports (D) forward until they click into place to
hold the pegs securely. ( Apply slight pressure on the peg and push the
peg forward the clip while pushing the clip forward.) Push the latches on
the processor (E) outward until they click into place in the retention
mechanism. The latches must be secured for proper electrical connection
of the processor.
Note:
Installing a heat sink and cooling fan is necessary for proper heat
l
dissipation from your CPU. Failing to install these items may
result in overheating and damage of your CPU.
Please refer to your boxed Pentium II processor installation or
l
other documentation attached with your CPU for detailed
installing instructions.
2-15