Shelf Supports; Removing The Shelf Supports; Installing The Shelf Supports; Oven Ceiling - Electrolux EHGL3 User Manual

Table of Contents

Advertisement

24 www.electrolux.com

10.1 Shelf supports

Removing the shelf supports

Installing the shelf supports

Install the shelf supports in the opposite
sequence.

10.2 Oven ceiling

You can fold down the heating element
on the oven ceiling to clean the oven ceil-
ing easily.
WARNING!
Deactivate the appliance before
you fold down the heating ele-
ment. Make sure that the appli-
ance is cold. There is a risk of
burns.
Folding down the heating element
1.
Remove the shelf supports.
2
1
You can remove the shelf supports to
clean the side walls.
1.
Pull the front of the shelf support
away from the side wall.
2.
Pull the rear end of the shelf support
away from the side wall and remove
it.
2.
Hold the heating element with two
hands at the front.
3.
Pull it forwards against the spring
pressure and out along the supports
on the two sides.
4.
The heating element folds down.
You can clean the oven ceiling.
Installing the heating element
1.
Install the heating element in the op-
posite sequence.
Install the heating element cor-
rectly above the supports on the
inner walls of the appliance.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ehgl3x

Table of Contents