Reading The Display And Status Leds - NEC ML440 User Manual

Figure 2-8 Entering Text
Table 2-2 Icons
ML440 End User Guide - Revision 1
• The handset uses capital letters as the first character and lower case
letters after that. To switch between upper case characters, lower
case characters, and numbers, press #.
• To enter a symbol, press 1 to cycle through the available symbols or
press Symbol
• If two letters in a row use the same number key, enter the first letter.
Wait for the cursor to move to the next position, then enter the
second letter.
• Press Select or
Save
• If you make a mistake while entering a name, move the cursor to
right of the incorrect character and press
the character to the left of the cursor (like the backspace key on a
keyboard).

Reading the Display and Status LEDs

Display Icons and Their Meaning
Since the icons appear based on what you are doing with handset, you
will never see all of the icons at one time.
their meaning.
Icon
and select the symbol you want to enter.
when you're finished.
The ringer is turned off. This handset will not ring when a call comes
in.
The keys are locked. See
The microphone is muted, and the caller can't hear you.
Getting Started
.The handset deletes
Clear
Save
Table 2-2 lists the icons and
Meaning
"Locking the Keypad" on page
2-7
3-6".