Alarm Screen - NEC ML440 User Manual

2-14 Getting Started
Table 2-12 Audio Screen Settings
Ring volume
Ring melody
Alert volume
Alert tone
Vibrator
Key sound
Confirmation sound
Coverage warning
Charger warning

Alarm Screen

See "Setting the Alarm" on page 3-7"
alarms on the handset.
a brief description.
Set the ringer volume. Press Up to raise the volume and Down to
lower the volume. Press Select or
the volume setting.
Choose this handset's ring melody. As you highlight each ring
melody, press to hear a sample. When you hear the melody
you want, press Select.
Set the volume for notification tones. Press Up to raise the volume
and Down to lower the volume. Press Select or
satisfied with the volume setting.
Choose the tone this handset uses for alerts and notifications. As
you highlight each tone, press
hear the tone you want, press Select.
Have the handset vibrate on an incoming call or a notification. Select
one of the following:
• Off: The handset will not vibrate at all.
• Vibrate then ring: The handset will vibrate first, then sound the
tone or melody on the second ring.
• Vibrate only: The handset will only vibrate, not ring.
• Vibrate and ring: The handset will vibrate and ring at the same
time.
Have the keypad sound a tone when you press a key. Choose one
of two sounds (Click or Tone) or select Silent to turn off the keypad
tone off. The tone will be activated after you press Select or
Press if you want the handset to sound a tone each time you
change a setting. Press
Press if you want the handset to sound a warning when you
approach the edge of the base's range. Press
tone.
Press if you want the handset to sound a warning when the
battery is getting low. Press
for more information on setting
Table 2-13 lists the types of alarms and provides
ML440 End User Guide - Revision 1
when you're satisfied with
when you're
to hear a sample. When you
to disable this tone.
to disable this
to disable this tone.
.