Table of Contents
Advertisement
Table 2-5 STATUS LED Settings
ML440 End User Guide - Revision 1
Handset LEDs
F1 (in function key 1)
F2 (in function key 2)
F3 (in function key 3)
F4 (in function key 4)
Configuring the STATUS LED on the Handset
The STATUS LED at the top of the handset has three available colors:
red, green and yellow; green and yellow are configurable by the user.
You can specify what color the STATUS LED turns when you miss a call,
have a new voice message, or need to recharge the battery. Follow the
steps below the configure the STATUS LED.
Press Menu to open the main menu screen.
Step 1
Select the General Settings icon, then select LED signal.
Step 2
Select Green LED, then choose what you want the green LED to mean.
Step 3
Press End to go back one menu level, then repeat the same selection
Step 4
with the Yellow LED.
For future reference, use
Step 5
if you set the LED to turn yellow when you miss a call, place an X under
Missed call on the YELLOW LED row.
LED Color
Missed Call
GREEN
YELLOW
Meaning
These four LEDs are controlled by the PBX: contact your system
administrator for information on the available LED states and what
each one means.
Table 2-5
to record your settings. For example,
Voice Mail
Getting Started
Low Battery
None (Off)
2-9
Advertisement
Table of Contents
