Limit Value Level File - Interharmonics; Limit Value Level File - Signaling Voltages - Fluke 1743 User Manual

PQ Log
Users Manual
Level
Enter the limit value in % V
Set
Enter the required harmonic and the appropriate limit value. The frequency and the limit
value are adapted in the limit value list by using Set. 50 limit values for harmonics can be
defined.
Limit Value Level File – Interharmonics
This screen allows you to specify or modify the limit values for interharmonics and save
them to the hard disk. Only limit values for interharmonic frequencies, such as 105 Hz or
1010 Hz, can be specified. For harmonic frequencies up to 2000 Hz, the limit values
defined for harmonics are valid. The frequency resolution is 5 Hz.
Set
Enter the required interharmonic and the appropriate limit value. Enter the frequency and
the limit value into the list by using the Set button. A maximum of 10 limit values for
interharmonics can be defined.

Limit Value Level File - Signaling Voltages

This screen allows you to specify or modify the limit values for signaling voltages. The
modified limit values can be saved.
Frequency
Enter the frequency of the signaling voltages (ripple control signals).
Level
Enter the limit value in % V
Set
Enter the required signaling voltage frequency and the appropriate limit value. The
signaling voltage frequency and limit value are entered in the limit value list by using this
button.
52
for the selected harmonics.
n
Transfers the harmonics selected in the selection list with the appropriate
limit value to the limit value list.
Transfers all harmonics listed in the selection list with the appropriate limit
value to the limit value list.
Transfer the harmonics selected in the limit value list with the appropriate
limit value to the selection list.
Transfers all harmonics listed in the limit value list with the appropriate
limit value to the selection list.
for the selected signaling voltage frequency.
n