Table of Contents
Advertisement
PQ Log
Users Manual
L1, L2, L3
Click this button to view the number of events of the respective phases.
Lx
Click this button to view the events of all the phases.
If there is a power failure on all three phases, three single events for each
phase are recorded. The response time for events is always 10 ms, which
cannot be modified.
There are two extra lines which sum up short and long interruptions
(<3 min, 3 min).
Events - Measurement Value List
Click the List icon to create a detailed list of all events.
Details such as the time, duration, and minimum or maximum voltage during an event are
displayed. If there is no voltage value given in the table, the event is classified as an
interruption (threshold is defined in limit value file example, 1 % or 10 %).
Table Summary
Displays the values represented in the Graphical Summary analysis in table form.
In this table, the numerical values for all parameters represented in the graphical
summary can be seen (1
maximum value (4
42
Figure 24. UNIPEDE DISDIP Table
The buttons L1, L2, and L3 show only the number of events of the respective
phase
The button Lx shows the events on all phases
The button E+i shows events and interruptions
The button E shows only the events
The buttons i
/ i
show only the short (i
st
lt
st
column). Also displayed are the limit value (3
th
column) and the 95 %-value (5
Note
) or long (i
) interruptions
st
lt
th
column).
egd015h.bmp
rd
column), the
Hide quick links:
Advertisement
Table of Contents
