PQ Log
Users Manual
Activities You Can Do with PQ Log
The activities that you can do with PQ Log are:
System Requirements
Table 1 shows the minimum computer requirements for PQ Log.
Free hard disk space
CD-ROM drive
Monitor
Serial interface, or a serial-to-USB interface
adapter and the USB adapter manufacturer's
driver software for the adapter
Windows N T, 2000, XP or later version
Color printer
Installing PQ Log
Insert the Logger's product CD into the CD-ROM drive. If your CD-ROM drive is
configured for Autorun, the installation starts automatically. If not, run the Launch.exe
program on the CD-ROM. Follow the instructions on the screen to install PQ Log in your
choice of language.
2
Mains signaling voltage
V Unbalance (Positive sequence/negative sequence harmonics)
Line (mains) frequency
Prepare the Logger for use, connected to the Logger, or in advance
Monitor live data from the Logger
Download recorded logged data to the PC
View, print, and export timeplots of all channels
Application-oriented analysis (sets of parameters to graph to achieve different
typical analysis tasks)
Perform harmonic studies
Perform statistical analysis
Generate data tables
Print tables, graphs, and comprehensive, formatted reports
Export data to an ASCII file
Upgrade the Logger's Firmware (operating software) when a new release is
available on the Fluke website
Perform standardized analysis of measured values according to the European
standard EN 50160
Table 1. System Requirements
PC Configuration for PQ Log
Necessary
Recommended
10 MB
>50 MB
800 x 600 pixels
1024 x 768 pt