Fluke 1743 User Manual page 15

Continuous job – The Logger starts logging as soon as it receives the setup
information you are completing now
Switch-activated job – The Logger starts logging when you press the START
button on the front of the Logger, and stops when you press it again
Time-activated job – The Logger waits until a programmed time to start
logging, and stops when the programmed stop time occurs. If you select Time
activated job, you need to fill in the start and stop times in the following
menu. This menu appears when you select the Time activated job radio
button
Figure 6. Time Setting Menu
14. Click the Next button. The confirmation screen appears, which allows you to
review the settings you are about to load into the Logger or save as a template to
a file on the PC.
PC Software for 1740 Series
Preparing the Logger for Use
egd006.bmp
7