Limit Value Level File - Voltage Harmonics - Fluke 1743 User Manual

The calculated values appear in the left list field and can be transferred
individually with the button
list field. The values in the right list will be taken into account in further
evaluations in PQ Log.
Save the limit value level file under an appropriate name. The installation
specific values I
Do the PQ Log evaluations as usual, PQ Log will take into account the adapted
limits.
Signaling Voltages
Opens the screen Limit value level file - Signaling Voltages which indicate the limit
values for signaling voltages.
Open
Opens a saved limit value level file with data extension *.gwd.
Save
Saves the selected limit values under the same file name. The data extension of a limit
value level file is *.gwd.
If you make changes to the standard limit value level file and then save this
file, when you exit from the screen, a message prompting confirmation on
whether you wish the open measurement to be analyzed with the updated
limit value level file appears.
Save as
Saves the selected limit values. The file name can be selected. The data extension of a
limit value level file is *.gwd.
Print
Prints the values of the current limit value level file.
Close
Exits the screen without saving changes. A warning message appears, prompting
confirmation on whether or not the modified values should be saved.
Limit Value Level File – Voltage Harmonics
This screen is used to specify or modify the limit values for harmonics. These altered
limit values can be saved. All limit values for harmonics which appear in the list on the
right hand side (limit value list) are saved in the limit value level file.
THD
Enter the limit value for the Total Harmonic Distortion (thd).
Harmonic
Enter the order of the harmonic (2
or all at once with the button
, S , S , and the new limit values are stored for future use.
A kV A
Note
nd th
- 50 harmonic).
PC Software for 1740 Series
PQ Log Feature Reference
to the right
51