Settings
This menu is mainly used to set up general settings such as language of user interface,
communication parameters, selection of files which contain the limits for evaluation, or
files for the AOA, the application oriented analysis function.
Settings- General
This function is used to:
1. Select the limit value file and file for Application Oriented Analysis.
2. Enter a header for the printouts.
3. All settings are saved and are active when the PQ Log is switched on again.
4. Set serial port (COM1) and Baud rate. The "General" screen is shown next:
Figure 25. Selecting Parameters
PC Software for 1740 Series
PQ Log Feature Reference
egd015i.bmp
45