Fluke 1743 User Manual page 25

PC Software for 1740 Series
Analyzing Logged Data
95 % of all measured values are less or equal to the 95 %-value. The remaining 5 % of
measured values exceed this value but must be below the 100 % limit value. Thus, the
95 %-value provides statistical information about the distribution of the measured values.
Also refer to PQ Log Feature Reference section.
Menu File>Print Document will print this diagram.
An analysis of the data can be done using menu Analysis>Table Summary:
egd015a.bmp
Figure 17. PQ Log Table Summary
For analysis of individual harmonics, select Analysis>Cumulative Frequency or the
appropriate icon. Harmonics and all other channels with a defined limit value are shown
in the following representation.
17