NEC Univerge DT310 User Manual page 37

Tone Override
To send off hook signals to an extension busy on a call:
Note: Your extension may send off hook signals
automatically.
1. Dial *.
-OR-
Dial 709.
2. Press the Off Hook Signaling key (Code 33).
Note 1: You hear Ring Busy Tone.
The called extension hears Call Alert
Note 2:
Notification.
To answer Tone Override:
1. Receive Tone Override.
2. Press the Hold key and talk with the party.
2-14 THU
CALLING
Voice MW
Department Step Call
To make a Step Call:
1. Place a call to a busy Department Group member.
-OR-
Place a call to a Department Group pilot number.
3:15PM
STA 12345678
2. Dial Department Step Code (2) to call the next
available Department Group member.
3. Repeat step 2 to call other Department Group
members.
Voice Over
To initiate a Voice Over to a busy extension:
1. Press the Voice Over key (Code 48).
-OR-
Dial 6.
You hear an alert tone and the Voice Over key
Note:
flashes. You can talk to the called party after
the alert tone ends.
To respond to a Voice Over alert tone to your extension:
You can only respond if you have a Voice Over
Note:
key.
1. Press the Voice Over key (Code 48).
The Voice Over key lights steadily (green) and
Note:
you can talk to the interrupting party.
To return to your original call:
1. Press the Voice Over key.
Your Voice Over key flashes red when you are
Note:
talking to your original call.
31