NEC Univerge DT310 User Manual page 31

Trunk Queuing
After pressing a busy Line key and receiving the trunk
busy indication:
1. Dial # or press Trunk Queuing/Camp On key
(Code 35).
2. Replace the handset.
When a line is available, your telephone will
Note:
ring; lift the handset and place the call.
Last Number Redial
1. Without lifting the handset,
press the Redial key.
2. To redial the last number, press #.
-OR-
Search for the desired number from the Redial List
by pressing the List Softkey and then the Redial
Softkey.
3. Press the Up Arrow/Down Arrow or VOLUME UP/
VOLUME DOWN keys to search for the desired
number.
4. Lift the handset or press Speaker to place the call.
LIST MENU
Redial CID
Note: To Redial on the 2-button handset, press
Speaker, Redial button and #.
Speed Dial – System/Group/Station
To dial a Station Speed Dial number:
1. Press the Speaker key.
2. Dial #7 (default Service Code).
To preselect, press a Line key in step 1 (instead
Note:
of Speaker).
3. Dial the Station Speed Dial buffer number (0~9):
1 = Station Speed Dial buffer 1
2 = Station Speed Dial buffer 2
:
:
0 = Station Speed Dial buffer 10
The stored number dials out.
Note 1:
Note 2: Unless you preselect, Trunk Group Routing
selects the trunk for the call. The system may
optionally select a specific Trunk Group for
the call.
If you have a DSS Console, you may be able to
Note 3:
press a DSS Console key to chain to a stored
number.
25