NEC Univerge DT310 User Manual page 17

1.
(5) Softkeys
Any feature shown at the bottom of the LCD is
available. The appropriate feature key is displayed
on the screen according to the call handling
process.
(6) Help
The user can press this key followed by a
programmable key to Check what Line or
Programmable Feature is programmed on the key.
(7) 8LD Display
(a) (b)
Rachel
Ben
Hannah
James
Page Switching Key
32 (8 keys x 4 pages) additional programmable
keys are provided. They can be programmed as
Flexible Line/Programmable feature key by
Telephony Server Administrator. For the SV8100,
the programmable keys can be set by Web/PCPro
and the user can also set them.
Maximum 11 characters (including icon)
Note:
Maximum 13 characters (excluding icon)
(C) (b) (a)
Julia
1
FDA
2
FDN
3
4
Paul
Scroll
(a) Icon
Status of the Line key such as Call termination,
Call Hold or Busy, and setting on the Feature key
are shown as Icons.
User's Status
• Idle
• I-HOLD
• Others Hold
• Recall
• Incoming Ringing
• During Conversation (Individual
Use)
• Call Transfer
• Conference
• During Conversation (Other
Party Use)
• Active Feature (Under a setting
of feature key like a "Call
Forwarding")
• Others
• Key is busy (example, if
programmed as a virtual
extension and the virtual
extension is busy).
11
Flashing
Icon
Pattern
Blink
Note
Blink
Note
Steady Lit