Microphone Control; Speakerphone Calls; Group Listen; Holding Calls - NEC Univerge DT310 User Manual

MICROPHONE CONTROL

1. Press the MIC key.
2. A lit MIC LED indicates that the MIC is on.

SPEAKERPHONE CALLS

1. Press the Speaker key and the Speaker LED lights.
2. Ensure that the MIC LED is lit.
3. Place an internal or outside call.
4. Converse.
5. Press the Speaker key to disconnect the call.
Note: The handset may be used at any time during
the conversation. To resume handsfree
operation or to monitor a call, press the
Speaker key (the Speaker LED lights) and
replace the handset.

GROUP LISTEN

To initiate Group Listen:
1. Place or answer a call using the handset.
2. Press the Speaker key twice (do not hang up).
Note 1: The Speaker LED flashes.
You can talk to the caller through the handset.
Note 2:
Your coworkers hear your caller's voice over
your telephone's speaker.
When you press the Speaker key once, you
Note 3:
turn your Speakerphone on. The second press
turns on Group Listen. Pressing the Speaker
key a third time cancels the Group Listen
feature.
2-13 WED
GROUP LISTEN
Conf

HOLDING CALLS

System Hold –
With a call in progress:
1. Press Hold.
Exclusive Hold –
With a call in progress:
1. Press the Exclusive Hold key (Code 45).
Note 1: To retrieve a held call, press the flashing Line
key or ICM key (Internal calls).
Calls on System Hold can be retrieved from
Note 2:
any multiline terminal with the held line
appearance.
After a preprogrammed time, the held call will
Note 3:
recall to the originating station.
2-13 WED
HOLD
InPg
27
5:40PM
5:40PM
STA 12345678
ExPg P/U