NEC UNIVERGE DT300 Series User Manual page 12

1.
BUSY
BUSY
4:26 PM
(1)
MUTE HSET
Push >>>
BUSY
4:26 PM
(2)
S&R
CONNECTION
4:26 PM
MIC DND
CONSULTATION HOLD
TRANSFER
4:26 PM
MIC CONF
Soft Key Features
When the Soft Key corresponding to a desired feature
name is operated, the selected feature name starts to
blink on the LCD. The blinking display of available
features takes precedence over the display of features
specified by the Soft Key pattern.
Note:
The Soft Keys can be programmed in System
Data to blink, remain steady, have no indication,
or display a character when either in use or idle.
2000
TUE 13 APR 2004
RLS >>>
2000
TUE 13 APR 2004
>>>
2000
TUE 13 APR 2004
>>>
2000
TUE 13 APR 2004
>>>
The following shows the default display patterns of
main features.
PICK (Call Pickup – Group)
Permits a station user to answer any calls directed to
other lines in the user's preset Call Pickup Group.
CONF (Three-way Calling)
Enables a station user to establish a three-way
conference by connecting an additional party to an
already existing conversation.
VOICE (Voice Call)
Enables the user to make a call to the called party's
built-in speaker. If the called party's MIC is on, the
called party can converse on hands-free.
MIC (Microphone On/Off)
Allows the user to turn the microphone on and off for
use with the speakerphone.
HSET (Headset)
Allows the user to go off-and on-hook when using the
headset.
RLS (Release Key)
Allows the user to release the current call when using the
headset, without waiting for the party to hang up.
S&R (Save and Repeat)
Allows a station to save a specific dialed number and
then redial that number later.