To Transfer A Call - NEC UNIVERGE DT300 Series User Manual

If unanswered
After preprogrammed time, Automatic Recall is initi-
ated.
Visual and audible signal (rapid flash and ring
burst) is sent to station which placed call on Exclu-
sive Hold. Recall shows as a flashing green LED
on your phone, and solid red on other phones with
same line.
Note:
Exclusive Hold excludes any other phone from
picking up your held call. Exclusive Hold shows
as a flashing green LED on your phone. The
same line on other phones appears as a solid red
LED.

TO TRANSFER A CALL

After conversing, ask party to hold.
Press Transfer key. Receive interrupted dial tone.
TRANSFER
4:26 PM
Dial destination station's extension, hang up or wait
for answer.
DT300 Series
TUE 13 APR 2004
Transferred station
TRANSFER
4:26 PM TUE 13 APR 2004
If transferring party hangs up, that station's number
appears in the center of recipient's display.
Transferring station
TRANSFER 2000
4:26 PM TUE 13 APR 2004
or trunk number
2001
DDD 3