Hand Held Products Dolphin 7200 User Manual page 77

C H A P T E R 6 D O L P H I N 7 2 0 0 2 D H A N D H E L D C O M P U T E R
To setup the imager, press F3.
To take an image:
Press and hold the ON/SCAN button. Release the ON/SCAN button to capture
the image when the desired image is displayed on the terminal screen. When you
release the ON/SCAN button, the terminal will save the image taken. You will hear a
confirming set of beeps and the screen shown below will display.
Place the unit in the Home Base, start the Dolphin File Transfer utility on your PC and
set it to receive a file.
Press <ENTER> on the Dolphin terminal to transfer the image to your PC. Go to
the directory to the file was transferred and you should see a file titled Gray.jpg.
Double click on the file to launch the viewer to see the image. Browsers like Netscape
or Internet Explorer are good tools for looking at jpg images. (Note: If you changed
any file format settings in the setup window for the program, the name of the file will
be different).
You can skip sending the file by pressing enter, then pressing esc when the Dolphin
attempts to transmit the file. F4 on the "Press ON/SCAN" screen will allow you to
exit the application.
77