C H A P T E R
8
U S I N G
T H E
D O L P H I N
7 2 0 0
C O M P A C T
H O M E B A S E
that the rails be mounted to the wall using a 25mm (1 in.) spacer to allow for
appropriate strain relief of the cables (see figure 23).
In either case, after wall mounting, it is recommended that the cables be secured to
the DIN rail through use of a wire tie to prevent damage to the Compact HomeBase
unit in case accidental or excessive force is applied to the cables. (see figure 24)
Figure 24
103