Configuring The Network With The Operation Panel - Lanier 5622 AG Operator's Manual

Configuring the Network with the Operation Panel

This section describes the basic procedures. Please make the settings appropriate
for the network you are using.
Important
❒ These settings should be made by your systems administrator or after con-
sulting with your systems administrator.
The following table shows the operation panel settings and their default set-
tings. These are included in "TCP/IP Menu" of the "Network" menu.
❖ ❖ ❖ ❖ Interface Settings/Network
Setting Name
IP Address
Subnet Mask
Gateway Address
Access Control
Access Mask
Network Boot
NW Frame Type
Effective Protocol
Ethernet Speed
❍ means that this protocol is active.
*1
❖ ❖ ❖ ❖ File Transfer Settings
Setting Name
Delivery Server IP Address
Fax RX File Transmission
Recall Interval Time
Number of Recalls
Note
❒ The file transfer function requires the optional Hard Disk Unit.
Value
011.022.033.044
000.000.000.000
000.000.000.000
000.000.000.000
000.000.000.000
None
Auto Select
TCP/IP
NetWare
NetBEUI
AppleTalk
Auto
Value
000.000.000.000
Setting per Line
Print at Delivery
Files to Deliver
Delivery Failure File
300 seconds
No
Configuring the Network
❍
*1
❍
*1
❍
*1
❍
*1
• Port 1: Do not Deliver.
• Port 2: Do not Deliver.
• Port 3: Do not Deliver.
No
All Files
—
1
13