Table of Contents
Advertisement
Chapter 6 Broadband
Table 7 Broadband: Add/Edit: PPPoE Encapsulation (continued)
LABEL
Apply
Cancel
6.2.1.1 Bridge
This screen displays when you select the Bridge mode.
Figure 19 Broadband: Add/Edit: Bridge Mode
The following table describes the labels in this screen.
Table 8 Broadband: Add/Edit: Bridge Mode
LABEL
General
Active
Name
Type
Mode
ATM PVC Configuration
VPI
78
DESCRIPTION
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to exit this screen without saving.
DESCRIPTION
Select this to activate the WAN configuration settings.
Specify a descriptive name for this connection.
Select whether it is ADSL/VDSL over PTM, ADSL over ATM, or Ethernet
connection.
•
ADSL/VDSL over PTM: The ZyXEL Device uses the VDSL technology for
data transmission over the DSL port.
•
ADSL over ATM: The ZyXEL Device uses the ADSL technology for data
transmission over the DSL port.
•
Ethernet: The ZyXEL Device transmits data over the Ethernet WAN port.
Select this if you have a DSL router or modem in your network already.
Select Bridge when your ISP provides you more than one IP address and you
want the connected computers to get individual IP address from ISP's DHCP
server directly. If you select Bridge, you cannot use routing functions, such as
Firewall, DHCP server and NAT on traffic from the selected LAN port(s).
The valid range for the VPI is 0 to 255. Enter the VPI assigned to you.
P-873HNUP-51B User's Guide
Advertisement
Table of Contents
