Table of Contents
Advertisement
Chapter 4 Tutorials
Note: QoS is applied to traffic flowing out of the ZyXEL Device.
Traffic that does not match this class is assigned a priority queue based on the internal QoS
mapping table on the ZyXEL Device.
QoS Example
Your computer
IP=192.168.1.23
and/or
MAC=AA:FF:AA:FF:AA:FF
E-mail traffic: Highest priority
Click Network Settings > QoS > General and select Active. Set your WAN Managed
1
Upstream Bandwidth to 10,000 kbps (or leave this blank to have the ZyXEL Device automatically
determine this figure). Click Apply.
Tutorial: Advanced > QoS
Click Queue Setup > Add new Queue to create a new queue. In the screen that opens, check
2
Active and enter or select the following values:
• Name: E-mail
•
To Interface
• Priority: 1 (High)
• Weight: 8
58
A colleague's computer
Other traffic: Automatic classifier
: WAN
DSL
10,000 kbps
P-873HNUP-51B User's Guide
Advertisement
Table of Contents
